ScholarWorks@Gyeongsang National University

Journal Articles(공학계열 > 기계공학과 > Journal Articles)34

Browse
rss_1.0 rss_2.0 atom_1.0

Subscribe to this collection to receive daily e-mail notification of new additions

Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 34

SCIESCOPUS
Advanced Machining Technologies for CVD-SiC: Hybrid Approaches and AI-Enhanced Control for Ultra-Precisionopen access

Han, Su-Yeon; Lee, Seung-Min; Jang, Min-Su; Yang, Ho-Soon; Kwak, Tae-Soo

ArticleIssue Date2025CitationApplied Sciences-basel, v.15, no.24PublisherMDPI
SCIESCOPUS
Author Correction: A study on hybrid-architecture deep learning model for predicting pressure distribution in 2D airfoils (Scientific Reports, (2025), 15, 1, (2155), 10.1038/s41598-024-84940-w)open access

Yoon, Jaehyun; Doh, Jaehyeok

ArticleIssue Date2025CitationScientific Reports, v.15, no.1PublisherNature Publishing Group
SCIESCOPUS
Thrombin-induced thrombosis models for ultrasound-guided thrombin injection of femoral artery pseudoaneurysms

Kang, Hyo Jeong; Islam, Md. Didarul; Choi, Young Ho; Lee, Yong Kab; Song, Myoung Je; Kim, Hyoung-Ho

ArticleIssue Date2025CitationPhysics of Fluids, v.37, no.8PublisherAmerican Institute of Physics
KCI
원터치 철근 커플러의 경량화 설계 및 공정 개발

이지호; 전차수; 류성기

ArticleIssue Date2025Citation한국기계가공학회지, v.24, no.7, pp 1 - 9Publisher한국기계가공학회
SCIESCOPUS
Back-turn Approach for Optimal Operation of Booster Pump Systemsopen access

Bae, Y. S.; Islam, M. D.; Choi, D. Y.; Kang, H. J.; Tae, S. J.; Kim, H. H.

ArticleIssue Date2025CitationJournal of Applied Fluid Mechanics, v.18, no.9, pp 2202 - 2211PublisherRegional Information Center for Science and Technology
SCIESCOPUS
Numerical Simulation of Solid-Liquid Two-Phase Flow Analysis of Submersible Drainage Pumps

Rakibuzzaman, Md; Islam, Md. Didarul; Kim, Hyoung-Ho; Suh, Sang-Ho; Zhou, Ling; Iqbal, A. K. M. Parvez

ArticleIssue Date2025CitationIrrigation and Drainage, v.74, no.5, pp 2279 - 2294PublisherJohn Wiley & Sons Inc.
KCI
저온환경에서 고장력강 용접구조물의 동파거동에 관한 실험적연구

김주현; 박지상; 남경식; 류성기

ArticleIssue Date2025Citation한국기계가공학회지, v.24, no.4, pp 26 - 32Publisher한국기계가공학회
KCI
항복비 제어기법을 활용한 냉간단조 제조공정 기술개발에 관한 연구

윤상봉; 이도영; 류성기

ArticleIssue Date2025Citation한국기계가공학회지, v.24, no.3, pp 20 - 25Publisher한국기계가공학회
SCIESCOPUSKCI
Improvement of hovering stability for UAVs under crosswinds via evolutionary learning-based optimal PID control

Yoon, Jaehyun; Kim, Mantae; Bang, Jinhong; Kim, Sanghoon; Doh, Jaehyeok

ArticleIssue Date2025CitationJournal of Mechanical Science and Technology, v.39, no.4, pp 2151 - 2162Publisher대한기계학회
SCIESCOPUS
A study on hybrid-architecture deep learning model for predicting pressure distribution in 2D airfoilsopen access

Yoon, Jaehyun; Doh, Jaehyeok

ArticleIssue Date2025CitationScientific Reports, v.15, no.1PublisherNature Publishing Group
KCI
초경 원형 톱날을 사용한 두랄루민 절단 공정의 가공 조건변화에 따른 소음 수준 및 주파수 분석

조동현; 박수빈; 이승민; 김수진; 황재욱; 국정환

ArticleIssue Date2025Citation한국기계가공학회지, v.24, no.1, pp 73 - 78Publisher한국기계가공학회
SCIESCOPUS
Cavitation and erosion effects on hydraulic performances of a submersible drainage pumpopen access

Rakibuzzaman, Md; Suh, Sang-Ho; Kim, Hyoung-Ho; Islam, Md. Didarul; Zhou, Ling; El-Emam, Mahmoud A.

ArticleIssue Date2025CitationAlexandria Engineering Journal, v.113, pp 431 - 450PublisherAlexandria University
KCI
높은 전열 면적을 갖는 고온고압용 쉐브론 생산시스템 연구

이일구; 한경국; 백진욱; 류성기

ArticleIssue Date2024Citation한국기계가공학회지, v.23, no.7, pp 24 - 30Publisher한국기계가공학회
SCOPUSESCIKCI
유동해석을 이용한 횡형 압력식 수영장 여과 시스템의 스트레이너 각도 변화에 따른 성능 연구

조문성; 강효정; 박세현; 전상진; 김정식; 이점우; 김형호

ArticleIssue Date2024Citation대한기계학회논문집 B, v.48, no.7, pp 383 - 394Publisher대한기계학회
KCI
사판식 피스톤 펌프의 진동 해석 및 실험적 모드 해석

이정실; 송철기; 전차수

ArticleIssue Date2024Citation한국기계가공학회지, v.23, no.5, pp 61 - 68Publisher한국기계가공학회
SCIESCOPUS
Evaluation of renovated double J stents using ureter models with and without stenosis

Choi, Young-Ho; Kang, Hyo Jeong; Kim, Kyung-Wuk; Jo, Mun Seong; Islam, Md. Didarul; Kim, Jeong Sik; Jeon, Sang Jin; Lee, Changje; Lee, Seung Bae; Kim, Min Uk, et al.

ArticleIssue Date2024CitationWorld Journal of Urology, v.42, no.1PublisherSpringer Verlag
KCI
밀링가공 시 공구 경로에 따른 채터링 분석

김동은; 이재경; 서재우

ArticleIssue Date2024Citation한국생산제조학회지, v.33, no.2, pp 107 - 112Publisher한국생산제조학회
KCI
장공타입의 Fin 제조용 순차이송 금형설계에 관한 연구

이일구; 김남용; 류성기

ArticleIssue Date2024Citation한국기계가공학회지, v.23, no.01, pp 18 - 23Publisher한국기계가공학회
KCI
사판식 피스톤 펌프의 베어링 윤활 방법 비교 연구

이정실; 전차수

ArticleIssue Date2023Citation한국기계가공학회지, v.22, no.12, pp 1 - 11Publisher한국기계가공학회
KCI
수소 전기차용 액체 수소 저장시스템 압력해소밸브 내 스템의이동거리에 따른 극저온 환경에서 열유동 특성 변화

성홍석; 이현복; 이세동; 지수민; 서정세

ArticleIssue Date2023Citation한국기계가공학회지, v.22, no.11, pp 35 - 42Publisher한국기계가공학회
1 2

Discover

Date Issued

Type

Language

Journal Index

RSS_1.0 RSS_2.0 ATOM_1.0

Gyeongsang National University Central Library, 501, Jinju-daero, Jinju-si, Gyeongsangnam-do, 52828, Republic of Korea+82-55-772-0532

COPYRIGHT 2022 GYEONGSANG NATIONAL UNIVERSITY LIBRARY. ALL RIGHTS RESERVED.

Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.

BROWSE

한국어