Detailed Information
Cited 28 time in 
Cited 30 time in 
Cited 30 time in
Metadata Downloads
An experimental study on the failure of carbon/epoxy single lap riveted joints after thermal exposure
- Authors
- Song, Min-Hwan; Kweon, Jin-Hwe; Kim, Sang-Kuk; Kim, Cheol; Lee, Tae-Joo; Choi, Sang-Min; Seong, Myeong-Su
- Issue Date
- Nov-2008
- Publisher
- Elsevier BV
- Keywords
- single lap; joint; thermal exposure; strength
- Citation
- Composite Structures, v.86, no.1-3, pp 125 - 134
- Pages
- 10
- Indexed
- SCIE
SCOPUS
- Journal Title
- Composite Structures
- Volume
- 86
- Number
- 1-3
- Start Page
- 125
- End Page
- 134
- ISSN
- 0263-8223
1879-1085
- Abstract
- The bearing strength of a blind riveted single lap joint of a carbon/epoxy composite after thermal exposure was Studied. Considering the maximum service temperature based on material specifications and glass transition temperature, six types of specimens were prepared and tested in accordance with ASTM D5961. Failure loads of specimens exposed to a 177 degrees C environment were above 90% compared to Sound specimens. Failure loads of 77% were obtained for specimens exposed to a 232 degrees C environment for 4 h. Bearing and rivet pulling-through failure modes were observed in all specimens. Delamination Caused by degradation of the matrix property was found in specimens exposed to temperature higher than 204 degrees C. (C) 2008 Elsevier Ltd. All rights reserved.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - 공학계열 > Division of Mechanical and Aerospace Engineering > Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.