ScholarWorks@Gyeongsang National University

Composites Research

Journal Title

  • Composites Research

ISSN

  • E 2288-2111 | P 2288-2103

Publisher

  • 한국복합재료학회

Listed on(Coverage)

KCI(Ranking) 2013-2019
KCI 2006-2021
KCI(Candidate) 2003-2005

Active

  • Active

    based on the information

    • KCI(Ranking);ESCI;KCI;

Country

  • SOUTH KOREA

Article List

21 - 40 out of 74 results.

ESCIKCI
섬유 플라즈마 처리에 따른 복합재료의 수지 함침성 및 기계적 특성 비교

양성백; 이동현; 이용석; 권동준

ArticleIssue Date2023CitationComposites Research, v.36, no.6, pp 388 - 394Publisher한국복합재료학회
ESCIKCI
Polyamide 6 입자 및 CTBN첨가 기술에 따른 에폭시/탄소섬유 복합재의 강인화 효과 및 기계적 특성

배성열; 이교문; SANJAY KUMAR; 석지훈; 손우혁; 최재완; 김윤해

ArticleIssue Date2023CitationComposites Research, v.36, no.5, pp 355 - 360Publisher한국복합재료학회
ESCIKCI
다관절 로봇 암 기반 고속 열 성형 공정을 활용한 열가소성 복합재 부품 평가

Shin, Ho-Young; Noh, Ji-Sub; Park, Gyu-Beom; Seok, Chang-Min; Kweon, Jin-Hwe; Kwak, Byeong-Su; Nam, Young-Woo

ArticleIssue Date2023CitationComposites Research, v.36, no.5, pp 321 - 328Publisher한국복합재료학회
ESCIKCI
VaRTM과 VAP 공정의 수지 충진실험 및 해석에 관한 연구

Yoon, Dong-Hwan; Seo, Kyeong-Ho; Kwon, Yu-Jung; Choi, Jin-Ho

ArticleIssue Date2023CitationComposites Research, v.36, no.5, pp 310 - 314Publisher한국복합재료학회
ESCIKCI
그래핀 옥사이드(Graphen Oxide ,GO)와 환원 그래핀의(Reduced graphe oxide, R-GO)의 물리화학적 특성 연구

Kim, Moo-Sun; Lee, Ho-Yong; Choi, Sung-Woong

ArticleIssue Date2023CitationComposites Research, v.36, no.3, pp 167 - 172Publisher한국복합재료학회
ESCIKCI
Vacuum Filtration method를 이용한 단섬유(short fiber)배열 영향성 분석

Lee, Sung-Kwon; Kim, Moo-Sun; Lee, Ho-Yong; Choi, Sung-Woong

ArticleIssue Date2023CitationComposites Research, v.36, no.3, pp 162 - 166Publisher한국복합재료학회
ESCIKCI
Evaluation of the Absorbing Performance of Radar-absorbing Structure with Periodic Pattern after the Low-velocity Impact

Shin, Joon-Hyung; Kwak, Byeong-Su

ArticleIssue Date2022CitationComposites Research, v.35, no.6, pp 469 - 476Publisher한국복합재료학회
ESCIKCI
3-차원 보강 복합재 체결부의 피로강도 특성 연구

Kim, Ji-Wan; An, Woo-Jin; Seo, Kyeong-Ho; Choi, Jin-Ho

ArticleIssue Date2022CitationComposites Research, v.35, no.5, pp 322 - 327Publisher한국복합재료학회
ESCIKCI
3차원으로 직조된 복합재 보강 패널의 기계적 특성 연구

Jeong, Jae-Hyeong; Hong, So -Mang; Byun, Joon-Hyung; Nam, Young -Woo; Kweon, Jin-Hwe

ArticleIssue Date2022CitationComposites Research, v.35, no.4, pp 269 - 276Publisher한국복합재료학회
ESCIKCI
X-Band 영역에서의 세라믹/샌더스트-알루미노실리케이트 복합재의 초고온 전자파 흡수 거동

Choi, Kwang-Sik; Sim, Dongyoung; Choi, Wonwoo; Shin, Joon-Hyung; Nam, Young-Woo

ArticleIssue Date2022CitationComposites Research, v.35, no.3, pp 201 - 215Publisher한국복합재료학회
ESCIKCI
산화그래핀(Graphene oxide)의 솔벤트(solvent)별 Solubility에 대한 연구

Jung, Su-Yeon; Choi, Sung-Woong

ArticleIssue Date2022CitationComposites Research, v.35, no.1, pp 18 - 22Publisher한국복합재료학회
ESCIKCI
Solvent 별 분산에 따른 Milled Carbon Fiber의 배열성 연구

Lee, Sung-Kwon; Choi, Sung-Woong

ArticleIssue Date2022CitationComposites Research, v.35, no.1, pp 47 - 51Publisher한국복합재료학회
ESCIKCI
Capillary 특성을 활용한 섬유 조건에 따른 유리섬유강화 복합재료의 함침성 및 계면강도 평가

Kim, Jong-Hyun; Kwon, Dong-Jun; Park, Joung-Man

ArticleIssue Date2021CitationComposites Research, v.34, no.5, pp 305 - 310Publisher한국복합재료학회
ESCIKCI
유리섬유/폴리카보네이트 복합재료의 기지 분자량에 따른 함침 및 기계적 물성 평가

Kim, Neul-Sae-Rom; Jang, Yeong-Jin; Lee, Eun-Soo; Kwon, Dong-Jun; Yang, Seong Baek; Lee, Jungeon; Yeum, Jeong Hyun

ArticleIssue Date2021CitationComposites Research, v.34, no.1, pp 1 - 7Publisher한국복합재료학회
ESCIKCI
조선해양 파이프 단열재 커버 적용을 위한 내화/난연 성능을 갖는 친환경 바잘트섬유 강화 퓨란계 복합재료 개발 연구

Kwon, Dong-Jun; Seo, Hyoung-Seock

ArticleIssue Date2021CitationComposites Research, v.34, no.1, pp 57 - 62Publisher한국복합재료학회
ESCIKCI
선경화 시간에 따른 항공기 De-icing용 나노실리카/폴리우레탄 복합재료 탑코트의 소수성 및 접착특성 평가

Kim, Jong-Hyun; Shin, Pyeong-Su; Kwon, Dong-Jun; Park, Joung-Man

ArticleIssue Date2020CitationComposites Research, v.33, no.6, pp 365 - 370Publisher한국복합재료학회
ESCIKCI
Evaluation of Impregnation and Mechanical Properties of Thermoplastic Composites with Different GF Content of GF/PP Commingled Fiber

Jang, Yeong-Jin; Kim, Neul-Sae-Rom; Kwon, Dong-Jun; Yang, Seong Baek; Yeum, Jeong Hyun

ArticleIssue Date2020CitationComposites Research, v.33, no.6, pp 346 - 352Publisher한국복합재료학회
ESCIKCI
유리 섬유/열가소성 복합 재료의 기계적 및 함침 특성에 대한직물 패턴의 영향

김늘새롬; 이은수; 장영진; 권동준; 양성백; 염정현

ArticleIssue Date2018CitationComposites Research, v.31, no.6, pp 317 - 322Publisher한국복합재료학회
ESCIKCI
기지재의 가교밀도에 따른 유리섬유 복합재료의 염수노화 후계면 및 기계적 물성

신평수; 김종현; 백영민; 박하승; 권동준; 박종만

ArticleIssue Date2018CitationComposites Research, v.31, no.5, pp 186 - 191Publisher한국복합재료학회
ESCIKCI
발포제에 따른 산무수물계 에폭시 폼의 압축강도 및 포밍특성 분석

권동준; 김종현; 박성민; 권일준; 박종만

ArticleIssue Date2018CitationComposites Research, v.31, no.4, pp 133 - 138Publisher한국복합재료학회
1 2 3 4

RSS_1.0 RSS_2.0 ATOM_1.0

Gyeongsang National University Central Library, 501, Jinju-daero, Jinju-si, Gyeongsangnam-do, 52828, Republic of Korea+82-55-772-0532

COPYRIGHT 2022 GYEONGSANG NATIONAL UNIVERSITY LIBRARY. ALL RIGHTS RESERVED.

Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.

BROWSE

한국어