Investigation and Analysis of Anchor Status of Small Coastal Fishing Vessels for Response to Submarine-Cable Risk Factors

Abstract

This study investigated the status of anchors for small fishing vessels that correspond with the risk factors of submarine cables, which are essential elements for offshore wind farms. As for target vessels, small coastal fishing vessels of less than ten tons were divided into four categories by tonnage, and 71 locations were compared from a total of 59 fishing vessels. In the results, the shank showed a difference of approximately 18.2% from 119.3 to 145.8 cm on average, while the stock exhibited a difference of approximately 18.9% from 130.3 to 160.6 cm. The size of the anchor, however, was not proportional to the increase in the tonnage of the fishing vessel, and the anchors were produced in their own forms, based on the experience of the crew in many cases. In the statistical processing results, significant differences occurred in all areas except for the fluke. The stock and shank, which affect the dragging anchor, showed significant differences at a level of p < 0.05 while the bill, bill to bill, and bill to shank exhibited differences at a level of p < 0.01. This indicates that standardized criteria are required for the anchors of small coastal fishing vessels of less than ten tons, and that design standards for materials and reinforcements also need to be prepared as thin rebars or wooden columns are used, in addition to steel pipes, as the materials of the stock in many cases.