Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
AISI 1020 CD-Bar 절삭가공 시 절삭조건이 절삭면에 미치는 영향Effect of Cutting Conditions on the Cutting Surface when Cutting AISI 1020 CD-Bar
- Other Titles
- Effect of Cutting Conditions on the Cutting Surface when Cutting AISI 1020 CD-Bar
- Issue Date
- Jun-2023
- Publisher
- 한국기계기술학회
- Keywords
- CD-Bar(인발봉강); Cutting condition(절삭조건); 표면거칠기(Surface roughness)
- Citation
- 한국기계기술학회지, v.25, no.3, pp 308 - 315
- Pages
- 8
- Indexed
- KCI
- Journal Title
- 한국기계기술학회지
- Volume
- 25
- Number
- 3
- Start Page
- 308
- End Page
- 315
- ISSN
- 1229-604X
2508-3805
- Abstract
- In this study, in order to confirm the machining characteristics of AISI 1020 CD-Bar, cutting was performed after strength measurement, and surface roughness analysis was performed according to cutting conditions. Tensile strength was reduced by about 27.7% compared to AISI 1045 material, and Rockwell hardness HRC was reduced by 46.7%. The surface roughness measurement after cutting was divided into roughing, semi-finishing and finishing turning. In particular, in finishing machining, the best surface roughness was confirmed when the cutting speed was 150m/min and the depth of cut was 0.6mm based on the feed rate of 0.05mm/rev.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - 해양과학대학 > Department of Maritime Police and Production System > Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.