이젝터를 적용한 무기성 슬러지 건조시스템 기술개발Development of Inorganic Sludge Drying System Technology Applied with Ejector by Air Velocity
- Other Titles
- Development of Inorganic Sludge Drying System Technology Applied with Ejector by Air Velocity
- Authors
- 조은만; 정원훈; 김동건; 김봉환
- Issue Date
- 2022
- Publisher
- 한국기계가공학회
- Keywords
- Air Drying(공기 건조); Computation Fluid Dynamics(전산유체역학); Cyclone Dryer(사이클론 건조기); Ejector 이젝터 ( ); Inorganic Sludge(무기성 슬러지)
- Citation
- 한국기계가공학회지, v.21, no.9, pp.35 - 41
- Indexed
- KCI
- Journal Title
- 한국기계가공학회지
- Volume
- 21
- Number
- 9
- Start Page
- 35
- End Page
- 41
- URI
- https://scholarworks.bwise.kr/gnu/handle/sw.gnu/1925
- DOI
- 10.14775/ksmpe.2022.21.09.035
- ISSN
- 1598-6721
- Abstract
- The moisture content of many inorganic sludges is less than 70% during dewatering. Hence, a mono or piston pump cannot feed the sludge dryer. Thus, most inorganic sludge should be moved to a landfill or recycled directly without any reduction method. This development was invented to apply cyclone dryers using air and specially designed for the continuous injection of sludge sources by negative pressure and high air velocity for low moisture inorganic matter. Therefore, wastewater sludge and raw water treatment sludge discharged from various industrial fields might be settled by this development. The cyclone dryer was commercialized useful as moisture reduction equipment. This development was applied using a sludge injection system for sludge feeding and under the cooperation of ejector design computational fluid dynamics. Furthermore, this paper presented good ejector model results, blowing an airflow of 264 m3/min at an actual performance test.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - 융합기술공과대학 > Department of Automotive Engineering > Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.