ScholarWorks@경상국립대학교

초록

The aim of this study was to determine the rheological property and crystallization behavior of polylactic acid (PLA) with improved heat resistance (IngeoT Biopolymer 4032D) through investigation of the melt viscosity and crystallization kinetics of PLA at different process temperatures. The viscosity was measured using a rotational rheometer under conditions of shear rates of 0.01, 0.1, and 1/s. The obtained rheological data show that the viscosity tended to decrease slightly as the shear rate increases and decrease sharply as the temperature increases from 180 degrees C to 210 degrees C. To investigate the effect of the process temperature on the crystallization kinetics and final crystallinity of PLA, thermal analysis using isothermal differential scanning calorimetry (DSC) were also performed. The Avrami equation was successfully applied for the isothermal crystallization kinetics model. From crystallization temperature of 85 degrees C to 120 degrees C, we found that the IngeoT Biopolymer 4032D PLA had the fastest crystallization rate (t(1/2): 26.0min) and the largest crystallinity (47.4%) at 100 degrees C.

키워드