A study on the design and simulation of a 600 dpi master F-theta lens

초록

This study is about the design and simulation of an f-theta lens, one of the main components used in laser printers and laser scanning systems. To design an f-theta lens, the optical paths of the components of the laser scanning unit, the f-theta lens, the cylinder lens, and the collimator lens must be identified. Simulations were performed on the performance of aspherical and beam size optical systems while considering the f-theta lens optical design and optical properties. And while considering the optical design and optical characteristics of the f-theta lens, simulation was conducted on the performance of the optical system for aspherical surface and ray aberrations by location, point spread function, spot diameter, and beam size. Optical system simulation was implemented by applying the collimator lens, polygon mirror, and cylinder lens to the design formula of an f-theta lens using the Code-V and design verification was performed with these results. ? The Korean Society for Precision Engineering This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

키워드