Effects of Cellulose Microfibers Prepared Using a Micro-Grinder on the Mechanical Properties of Recycled Paper Cup-Based Composite Sheets

  • Min Seo Kim; 
  • Uk Chang Yang; 
  • Hee Yeon Jeong; 
  • Ji Young Lee
Citations

SCOPUS

0

초록

This study investigated the reinforcing effects of cellulose microfibers (CMF) prepared using a micro-grinder on handsheets made from recycled paper cup powder and starch, which served as model specimens for wet injection-molded composites. Recycled paper cups were pulverized using a two-stage grinder, and CMF were produced from hardwood bleached kraft pulp via two passes through a micro-grinder. Handsheets with a grammage of 60 ± 5 g/m2 were prepared using 60 wt% recycled paper cup powder and varying amounts of CMF (1, 3, and 5 wt%) as a partial starch replacement. The recycled paper cup powder had an average fiber length and width of 0.44 mm and 25.3 μm, respectively, whereas the CMF prepared using a micro-grinder had an average fiber width of 34.1 nm. The tensile index, elongation at break, and burst index of the handsheets increased with CMF content, reaching maximum valuesat 5 wt%. Specifically, at this level, compared with the control, the tensile index increased from 11.3 to 27.2 N·m/g, the elongation at break from 1.3% to 2.6%, and the burst index from 7.4 to 13.6 kPa·m2/g. These improvements may be attributed to enhanced inter-fiber bonding and the formation of a more inter-connected fiber network. Overall, CMF prepared using a micro-grinder show considerable potential as a reinforcing material for wet injection molding. However, further research is necessary to evaluate their performance under actual processing conditions and in the final wet-injection molded products.

키워드

Cellulose microfiber; micro-grinder; recycled paper cup; starch; reinforcement; handsheet; wet injection molding
제목
Effects of Cellulose Microfibers Prepared Using a Micro-Grinder on the Mechanical Properties of Recycled Paper Cup-Based Composite Sheets
저자
Min Seo Kim; Uk Chang Yang; Hee Yeon Jeong; Ji Young Lee
DOI
10.7584/JKTAPPI.2026.10.58.5.120
발행일
2026-10
유형
Y
저널명
펄프종이기술
권
58
호
5
페이지
120 ~ 126