상세 보기
Hierarchically structured silica-reinforced PLA nanofibrous membranes with enhanced anti-wetting and mechanical stability for air-gap membrane distillation
- Aijaz, Muhammad Omer;
- Samad, Ubair Abdus;
- Othman, Mohd Hafiz Dzarfan;
- Alnaser, Ibrahim Abdullah;
- Khan, Asmat Ullah;
- ... Yang, Seong Baek;
- 외 2명
WEB OF SCIENCE
0SCOPUS
0초록
This study presents a hierarchically structured biodegradable superhydrophobic polylactic acid (PLA)/fumed silica (FS) nanofibrous membrane for anti-wetting air-gap membrane distillation (AGMD). Unlike biodegradable membrane studies that primarily rely on post-fabrication surface modification, hydrophobic FS nanoparticles were directly incorporated into the PLA spinning solution through a one-step electrospinning process, enabling intrinsic control of fiber morphology, pore structure, surface roughness, and wettability throughout the membrane matrix. Subsequent post-heat treatment reinforced inter-fiber bonding while preserving the porous architecture for vapor transport. FS incorporation reduced fiber diameter from 810 to 627 nm and pore size from 1.37 to 0.70 & micro;m, promoting a rough surface favoring the Cassie-Baxter wetting state. The optimized membrane (S4, 7 wt% FS) exhibited a water contact angle of 154 degrees, liquid entry pressure of 38 kPa, elastic modulus of 166 MPa, and enhanced thermal stability with an onset degradation temperature of 330 degrees C. Through comprehensive characterization techniques such as FE-SEM, AFM, gloss analysis, air permeability, nanoindentation, and mechanical testing, significant enhancements in membrane integrity and anti-wetting properties were observed. Nanoindentation results indicated improvements in both hardness and modulus compared to the original PLA membranes. During AGMD desalination, the optimized membrane consistently achieved a permeate flux of 3.1 kg/m(2) h, with salt rejection rates surpassing 99 % for a 3.5 wt% NaCl feed solution. The enhanced performance was attributed to synergistic effects of hierarchical roughness, pore regulation, mechanical reinforcement, and improved wetting resistance. These findings demonstrate a sustainable strategy for developing high-performance biodegradable membranes as alternatives to petroleum-derived MD materials.
키워드
- 제목
- Hierarchically structured silica-reinforced PLA nanofibrous membranes with enhanced anti-wetting and mechanical stability for air-gap membrane distillation
- 저자
- Aijaz, Muhammad Omer; Samad, Ubair Abdus; Othman, Mohd Hafiz Dzarfan; Alnaser, Ibrahim Abdullah; Khan, Asmat Ullah; Assaifan, Abdulaziz K.; Yang, Seong Baek; Karim, Mohammad Rezaul
- 발행일
- 2026-10
- 유형
- Article
- 권
- 15
- 호
- 1
- 언어
- ENG
- 출판사
- WALTER DE GRUYTER GMBH
- 발행국가
- 독일
- ISSN
- E 2191-9097
P 2191-9089