ScholarWorks@경상국립대학교

초록

The structural and electrochemical properties of annealed Si film electrodes with titanium-nickel (TiNi) current collectors have been investigated to identify compounds and microstructures that improve electrochemical performances. The as-deposited Si/TiNi electrode consisted of amorphous Si (alpha-Si) and crystalline B2-TiNi alloy at room temperature. Only a thin oxide layer was formed at the interface, and any significant microstructural change was not found at 500 degrees C compared to the as-deposited electrode. The Ni atoms started to migrate from the TiNi alloy to the Si film at 600 degrees C, which resulted in the formation of a Ti-rich (Ti2Ni) layer at the interface. A large amount of Ni diffused into the Si film at 700 degrees C led to the formation of nickel silicide (NiSi2) particles being dispersed in the film. The Si/TiNi electrodes that were annealed at a temperature exceeding 600 degrees C showed improved electrochemical properties such as initial efficiency (similar to 90%) and cycle performance (50% capacity retention after 300 cycles). The excellent electrochemical performance was achieved by enhancing the structural stability in annealed Si/TiNi electrodes. (C) 2020 Elsevier B.V. All rights reserved.

키워드