배출가스 중 먼지 농도 측정방법의 문제점 및 개선방안

A Study on the Challenges and Improvement in Methods for Measuring Dust Concentrations in Stack Emissions

초록

This study compared the dust concentration measurement methods specified in Korean ES 01301.1, U.S. EPA Method 5, and Japanese JIS Z 8808, focusing on the effects of reference temperature and moisture measurement on isokinetic sampling and calculated dust concentrations. All three methods employ isokinetic sampling and gravimetric analysis; however, ES and JIS use a reference temperature of 0°C, whereas EPA Method 5 uses 20°C. Furthermore, several equations required for isokinetic sampling are not explicitly defined in ES, resulting in the use of EPA-based foemulations in field measurements. Analysis of 100 stack gas measurements with an isokinetic ratio (I factor) of 100 ± 1% revealed a liner relationship between orifice differential pressure (ΔH) and sampling flow rate (Flow = 0.275 × ΔH + 8.361). The resulting calculation constants differed by approximately 7.3% at 20°C and 0°C. Consequently, final dust concentrations calculated under different reference temperature and moisture content conditions ranged from 35.9 to 38.7 mg/m³. These results indicate that standardization of isokinetic sampling equations, appropriate correction for reference temperature differences, and improved moisture measurement representativeness are necessary to enhance the accuracy and reliability of stack emission dust measurements.

키워드

Dust in stack emissions; Isokinetic sampling; Moisture content; Reference temperature; ES 01301.1; EPA Method 5; JIS Z 8808
제목
배출가스 중 먼지 농도 측정방법의 문제점 및 개선방안
제목 (타언어)
A Study on the Challenges and Improvement in Methods for Measuring Dust Concentrations in Stack Emissions
저자
송근우; 박정호
발행일
2026-10
유형
Y
저널명
한국환경과학회지
권
35
호
10
페이지
891 ~ 901