상세 보기
초록
In this study, in order to confirm the machining characteristics of AISI 1020 CD-Bar, cutting was performed after strength measurement, and surface roughness analysis was performed according to cutting conditions. Tensile strength was reduced by about 27.7% compared to AISI 1045 material, and Rockwell hardness HRC was reduced by 46.7%. The surface roughness measurement after cutting was divided into roughing, semi-finishing and finishing turning. In particular, in finishing machining, the best surface roughness was confirmed when the cutting speed was 150m/min and the depth of cut was 0.6mm based on the feed rate of 0.05mm/rev.
키워드
CD-Bar(인발봉강); Cutting condition(절삭조건); 표면거칠기(Surface roughness)
- 제목
- AISI 1020 CD-Bar 절삭가공 시 절삭조건이 절삭면에 미치는 영향
- 제목 (타언어)
- Effect of Cutting Conditions on the Cutting Surface when Cutting AISI 1020 CD-Bar
- 저자
- 강일석; 이태호
- 발행일
- 2023-06
- 저널명
- 한국기계기술학회지
- 권
- 25
- 호
- 3
- 페이지
- 308 ~ 315
- 언어
- KOR
- 출판사
- 한국기계기술학회
- 발행국가
- 대한민국
- 분량
- 8 페이지
- ISSN
- E 2508-3805
P 1229-604X