Overcoming the limitations of low-bandgap Cu2ZnSn(S,Se)(4) devices under indoor light conditions: from design to prototype IoT application

초록

With the growing need for cost-effective and sustainable Internet of things (IoT) technologies, kesterite-based solar cells are gaining popularity. We report the fabrication of an efficient CZTSSe absorber layer with improved V-oc loss and its possible use in indoor photovoltaic applications. The double cation incorporation (co-doping) approach is employed with Ag and Ge to achieve this. The devices fabricated and tested under standard illumination (1 sun) and low light intensity conditions showed enhanced device performances and lower V-oc losses after co-doping. Under indoor light conditions, V-oc of 290 mV with white LED (WLED) and 310 mV with fluorescent lamp (FL-4000K) was achieved at the lowest intensity of 400 lux, while a value exceeding 350 mV was obtained at 1200 lux with FL-4000K for the CZTSSe:Ag-Ge device. V-oc recoveries of >60% under all intensity conditions and >70% at 1200 lux with both WLED and FL-4000K were achieved. Moreover, the CZTSSe:Ag-Ge device showed efficiencies of 4.95% and 5.85% under WLED and FL-4000K at 1200 lux, respectively. The prototype device also demonstrated successful test results under indoor conditions. These achievements are attributed to the enhanced carrier density, reduced density of defects, and low carrier recombinations.

키워드