Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
표면조직 가공한 유압부품면에서의 윤활특성
Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | 이준오 | - |
| dc.contributor.author | 박태조 | - |
| dc.date.accessioned | 2022-12-27T02:05:44Z | - |
| dc.date.available | 2022-12-27T02:05:44Z | - |
| dc.date.issued | 2012 | - |
| dc.identifier.issn | 2671-7972 | - |
| dc.identifier.issn | 2671-7980 | - |
| dc.identifier.uri | https://scholarworks.gnu.ac.kr/handle/sw.gnu/22615 | - |
| dc.description.abstract | Friction reduction between sliding hydraulic machine components is required to improve efficiency and reliability of hydraulic machineries. It is recently reported that surface texturing on sliding bearing surfaces can reduce the friction force highly. In this paper, numerical analysis is carried out to investigate the effect of dimple numbers and inlet boundary pressures on the lubrication characteristics of a parallel sliding bearing using a commercial computational fluid dynamics (CFD) code, FLUENT. The results show that the pressure distribution, load capacity, dimensionless friction force and leakage with dimple number and their locations, and inlet pressures. The overall lubrication characteristics are highly affected by dimple numbers and boundary pressure. The numerical method adopted and results can be used in design of efficient hydraulic machine components | - |
| dc.format.extent | 6 | - |
| dc.language | 한국어 | - |
| dc.language.iso | KOR | - |
| dc.publisher | 사단법인 유공압건설기계학회 | - |
| dc.title | 표면조직 가공한 유압부품면에서의 윤활특성 | - |
| dc.title.alternative | Lubrication Characteristics of Surface Textured Hydraulic Machine Components | - |
| dc.type | Article | - |
| dc.publisher.location | 대한민국 | - |
| dc.identifier.doi | 10.7839/ksfc.2012.9.4.026 | - |
| dc.identifier.bibliographicCitation | 드라이브·컨트롤, v.9, no.4, pp 26 - 31 | - |
| dc.citation.title | 드라이브·컨트롤 | - |
| dc.citation.volume | 9 | - |
| dc.citation.number | 4 | - |
| dc.citation.startPage | 26 | - |
| dc.citation.endPage | 31 | - |
| dc.identifier.kciid | ART001715663 | - |
| dc.description.isOpenAccess | Y | - |
| dc.description.journalRegisteredClass | kciCandi | - |
| dc.subject.keywordAuthor | Surface Texturing(표면조직) | - |
| dc.subject.keywordAuthor | Micro-dimple(미세 딤플) | - |
| dc.subject.keywordAuthor | Friction Reduction(마찰감소) | - |
| dc.subject.keywordAuthor | Hydraulic Machine Components(유압부품) | - |
| dc.subject.keywordAuthor | CFD(전산유체역학) | - |
| dc.subject.keywordAuthor | Surface Texturing | - |
| dc.subject.keywordAuthor | Micro-dimple | - |
| dc.subject.keywordAuthor | Friction Reduction | - |
| dc.subject.keywordAuthor | Hydraulic Machine Components | - |
| dc.subject.keywordAuthor | CFD | - |
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - 공과대학 > Department of Mechanical Engineering > Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.