Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
원형 톱과 엔드밀의 복합재료 절단 음향과 버 비교연구
Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | 주창민 | - |
| dc.contributor.author | 백종현 | - |
| dc.contributor.author | 김수진 | - |
| dc.contributor.author | 이건명 | - |
| dc.date.accessioned | 2022-12-26T08:00:48Z | - |
| dc.date.available | 2022-12-26T08:00:48Z | - |
| dc.date.issued | 2022-07 | - |
| dc.identifier.issn | 1598-6721 | - |
| dc.identifier.issn | 2288-0771 | - |
| dc.identifier.uri | https://scholarworks.gnu.ac.kr/handle/sw.gnu/2104 | - |
| dc.description.abstract | Circular sawing and milling are general machining processes used for routing fiber-reinforced plastics (FRP). In this study, the productivity and cutting quality of a circular saw and flat endmill were compared. As a result, the productivity of the circular saw was approximately ten times higher than that of the endmill for the same tool life, and the burr size of the circular saw was 14 times smaller than that of the flat-end mill. The spectrogram analysis of the cutting sound also showed that the acoustic emission of the circular saw was more uniform than that of the flat end mill. Circular sawing is thus a more suitable process for the straight cutting of pultrusion FRP than a flat endmill. | - |
| dc.format.extent | 7 | - |
| dc.language | 한국어 | - |
| dc.language.iso | KOR | - |
| dc.publisher | 한국기계가공학회 | - |
| dc.title | 원형 톱과 엔드밀의 복합재료 절단 음향과 버 비교연구 | - |
| dc.title.alternative | Acoustic Emission and Burr Comparison of Circular Sawing and Milling in Fiber Reinforced Plastic Cutting | - |
| dc.type | Article | - |
| dc.publisher.location | 대한민국 | - |
| dc.identifier.bibliographicCitation | 한국기계가공학회지, v.21, no.7, pp 98 - 104 | - |
| dc.citation.title | 한국기계가공학회지 | - |
| dc.citation.volume | 21 | - |
| dc.citation.number | 7 | - |
| dc.citation.startPage | 98 | - |
| dc.citation.endPage | 104 | - |
| dc.identifier.kciid | ART002862506 | - |
| dc.description.isOpenAccess | N | - |
| dc.description.journalRegisteredClass | kci | - |
| dc.subject.keywordAuthor | Circular Saw(원형 톱) | - |
| dc.subject.keywordAuthor | Endmill(엔드밀) | - |
| dc.subject.keywordAuthor | GFRP(유리섬유 복합재료) | - |
| dc.subject.keywordAuthor | CFRP(탄소섬유 복합재료) | - |
| dc.subject.keywordAuthor | Machining(절삭가공) | - |
| dc.subject.keywordAuthor | Productivity(생산성) | - |
| dc.subject.keywordAuthor | Burr(버) | - |
| dc.subject.keywordAuthor | Acoustic Emission(음향방출) | - |
- Files in This Item
- There are no files associated with this item.
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.