Performance evaluation of bar plates without a draft angle to improve refining efficiency

Abstract

Most of the refiner plates currently in use are made via sand casting, so a draft angle is given to prevent damage to the mold; in addition, the draft angle can reduce the flow rate of the pulp stock and sharpness of the bar edge. In this study, the effect of a bar plate without a draft angle was compared by manufacturing the bar plate using lost-wax casting technology. The vertical bar had a larger cutting edge load and consumed less refining energy than the tapered bar until the target freeness was reached. Instead, more fiber cutting by the vertical bar caused more sacrifice of fiber length and more fines content, which resulted in a faster reduction in the tear strength properties of the paper. Moreover, the tensile and burst strength of the paper was more developed by the vertical bar plate. The rectangular groove inlet of the vertical bar had a larger surface area than the trapezoidal groove of the tapered bar, so more throughput of pulp stock could be processed in a certain period. In conclusion, the vertical bar-shaped plate is expected to yield better results than the tapered bar-shaped plate in terms of energy saving and refining effects on pulp fibers. ? 2019 Korean Technical Assoc. of the Pulp and Paper Industry. All rights reserved.