Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
마이크로 지오메트리 방법을 이용한 크로스 드릴링/밀링 유닛 구동기어의 동력전달 최적화에 관한 연구
Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | 김동선 | - |
| dc.contributor.author | 진진 | - |
| dc.contributor.author | 백권인 | - |
| dc.contributor.author | 우위팅 | - |
| dc.contributor.author | 전남술 | - |
| dc.contributor.author | 류성기 | - |
| dc.date.accessioned | 2022-12-26T16:01:16Z | - |
| dc.date.available | 2022-12-26T16:01:16Z | - |
| dc.date.issued | 2019 | - |
| dc.identifier.issn | 1598-6721 | - |
| dc.identifier.issn | 2288-0771 | - |
| dc.identifier.uri | https://scholarworks.gnu.ac.kr/handle/sw.gnu/10420 | - |
| dc.description.abstract | A cross drilling/milling Unit is an important mechanical part which is widely used in many kinds of machining tool, and various gear trains with good accuracy and reliability features are widely used in power transmission systems. A study on a novel power transmission optimization method for driving gear trains in cross drilling/milling units is presented in this paper. A commercial program for gear system simulation, Romax Designer, was used in this research to intuitively observe the gear meshing and the load distribution conditions on the gear teeth. We obtained the optimal modification value through comparing the results of repeated experiments. For validation, optimized gears were fabricated and then measured with a precision tester. | - |
| dc.format.extent | 7 | - |
| dc.language | 한국어 | - |
| dc.language.iso | KOR | - |
| dc.publisher | 한국기계가공학회 | - |
| dc.title | 마이크로 지오메트리 방법을 이용한 크로스 드릴링/밀링 유닛 구동기어의 동력전달 최적화에 관한 연구 | - |
| dc.title.alternative | Power Transmission Optimization Based on the Driving Gear of a Cross Drilling/Milling Unit using a Micro Geometry Method | - |
| dc.type | Article | - |
| dc.publisher.location | 대한민국 | - |
| dc.identifier.doi | 10.14775/ksmpe.2019.18.4.093 | - |
| dc.identifier.bibliographicCitation | 한국기계가공학회지, v.18, no.4, pp 93 - 99 | - |
| dc.citation.title | 한국기계가공학회지 | - |
| dc.citation.volume | 18 | - |
| dc.citation.number | 4 | - |
| dc.citation.startPage | 93 | - |
| dc.citation.endPage | 99 | - |
| dc.identifier.kciid | ART002458664 | - |
| dc.description.isOpenAccess | Y | - |
| dc.description.journalRegisteredClass | kci | - |
| dc.subject.keywordAuthor | Cross Drilling/Milling Unit(크로스 드릴링/밀링 유닛) | - |
| dc.subject.keywordAuthor | Profile Error (형상오차) | - |
| dc.subject.keywordAuthor | Lead Error (리드오차) | - |
| dc.subject.keywordAuthor | Micro Geometry (마이크로 지오메트리) | - |
| dc.subject.keywordAuthor | Gear Train(기어 트레인) | - |
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - 공학계열 > 기계항공우주공학부 > Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.