ScholarWorks@Gyeongsang National University

Browsing by Sung, HyokyungAuthor

All A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
전체 가 나 다 라 마 바 사 아 자 차 카 타 파 하

Showing results 1 to 20 of 47

SCIESCOPUS
A feasible route to produce 1.1 GPa ferritic-based low-Mn lightweight steels with ductility of 47%

Ko, Kwang Kyu; Bae, Hyo Ju; Park, Eun Hye; Jeong, Hyeon-Uk; Park, Hyoung Seok; Jeong, Jae Seok; Kim, Jung Gi; Sung, Hyokyung; Parl, Nokeun; Seol, Jae Bok

ArticleIssue Date2022CitationJournal of Materials Science & Technology, v.117, pp 225 - 237PublisherAllerton Press Inc.
SCOPUSESCI
Artificial intelligence for the prediction of tensile properties by using microstructural parameters in high strength steels

Jung, Im Doo; Shin, Da Seul; Kim, Doohee; Lee, Jungsub; Lee, Min Sik; Son, Hye Jin; Reddy, N. S.; Kim, Moobum; Moon, Seung Ki; Kim, Kyung Tae, et al.

ArticleIssue Date2020CitationMATERIALIA, v.11PublisherELSEVIER SCI LTD
SCIE
Correlation Between Microstructure and Tensile Properties of STS 316L and Inconel 718 Fabricated by Selective Laser Melting (SLM)

Lee, Jungsub; Lee, Minshik; Jung, Im Doo; Choe, Jungho; Yu, Ji-Hun; Kim, Sangshik; Sung, Hyokyung

ArticleIssue Date2020CitationJOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, v.20, no.11, pp 6807 - 6814PublisherAMER SCIENTIFIC PUBLISHERS
SCIESCOPUS
Cryogenic tensile behavior of carbon-doped CoCrFeMnNi high-entropy alloys additively manufactured by laser powder bed fusionopen access

Park, Haeum; Kwon, Hyeonseok; Kim, Kyung Tae; Yu, Ji-Hun; Choe, Jungho; Sung, Hyokyung; Kim, Hyoung Seop; Kim, Jung Gi; Park, Jeong Min

ArticleIssue Date2024CitationAdditive Manufacturing, v.86PublisherElsevier B.V.
SCIESCOPUSKCI
Development of 1.2 GPa Ferrite-based Lightweight Steels via Low-temperature Temperingopen access

Bae, Hyo Ju; Ko, Kwang Kyu; Park, Hyoung Seok; Jeong, Jae Seok; Kim, Jung Gi; Sung, Hyokyung; Seol, Jae Bok

ArticleIssue Date2021CitationKOREAN JOURNAL OF METALS AND MATERIALS, v.59, no.10, pp 683 - 691PublisherKOREAN INST METALS MATERIALS
SCIESCOPUS
Development of artificial neural networks software for arsenic adsorption from an aqueous environment

Maurya, A. K.; Nagamani, M.; Kang, Seung Won; Yeom, Jong-Taek; Hong, Jae-Keun; Sung, Hyokyung; Park, C. H.; Reddy, Paturi Uma Maheshwera; Reddy, N. S.

ArticleIssue Date2022CitationEnvironmental Research, v.203PublisherAcademic Press
SCIESCOPUS
Direct observation of chemical short-range order in 25 wt% Mn steel via transmission electron microscopy

Kayani, Saif Haider; Park, Sangeun; Kim, Jung Gi; Seol, Jae Bok; Sung, Hyokyung

ArticleIssue Date2022CitationSCRIPTA MATERIALIA, v.213PublisherPERGAMON-ELSEVIER SCIENCE LTD
SCIESCOPUS
Dislocation-aided electrochemical behavior of precipitates in stress corrosion cracking of Al-Zn-Mg-Cu alloys

Seol, Jae Bok; Kim, Jung Gi; Sung, Hyokyung; Kayani, Saif Haider; Park, Sangeun; Euh, Kwangjun

ArticleIssue Date2022CitationMaterials Characterization, v.190PublisherElsevier BV
SCISCIESCOPUSKCI
Effect of Cooling Rate on SCC Susceptibility of beta-Processed Ti-6Al-4V Alloy in 0.6M NaCl Solution

Ahn, Soojin; Park, Jiho; Jeong, Daeho; Sung, Hyokyung; Kwon, Yongnam; Kim, Sangshik

ArticleIssue Date2018CitationMETALS AND MATERIALS INTERNATIONAL, v.24, no.2, pp 327 - 336PublisherKOREAN INST METALS MATERIALS
SCIESCOPUSKCI
Effect of Cr and N on the Stress Corrosion Cracking Behavior of Fe-18Mn Steelopen access

Choi, Heesoo; Kim, Sumin; Sung, Hyokyung; Kim, Sung-Joon; Kim, Sangshik

ArticleIssue Date2019CitationKOREAN JOURNAL OF METALS AND MATERIALS, v.57, no.10, pp 624 - 631PublisherKOREAN INST METALS MATERIALS
SCIE
Effect of Exposure Time on Stress Corrosion Cracking Susceptibility of Al-Zn-Mg-Cu Alloys

An, Jaehyun; Lee, Minsik; Euh, Kwang Jun; Jung, Im Doo; Kim, Sangshik; Sung, Hyokyung

ArticleIssue Date2020CitationSCIENCE OF ADVANCED MATERIALS, v.12, no.11, pp 1666 - 1672PublisherAMER SCIENTIFIC PUBLISHERS
SCIESCOPUS
Effect of Interdendritic Precipitations on the Mechanical Properties of GBF or EMS Processed Al-Zn-Mg-Cu Alloysopen access

Park, Sangeun; Kayani, Saif Haider; Kim, Hyungrae; Jung, Im Doo; Reddy, N. S.; Euh, Kwangjun; Seol, Jae Bok; Kim, Jung Gi; Sung, Hyokyung

ArticleIssue Date2021CitationCRYSTALS, v.11, no.10PublisherMDPI
SCIE
Effect of Microstructure on Stress Corrosion Cracking Susceptibility of Ultra-High Strength Steel

An, Woojin; Ham, Jinhee; Park, Tae Won; Son, Jinil; Jung, Im Doo; Kim, Sangshik; Sung, Hyokyung

ArticleIssue Date2020CitationSCIENCE OF ADVANCED MATERIALS, v.12, no.11, pp 1642 - 1648PublisherAMER SCIENTIFIC PUBLISHERS
SCIESCOPUSKCI
Effect of Pre-Straining on High Cycle Fatigue and Fatigue Crack Propagation Behaviors of Complex Phase Steel

Kim, Sumin; Song, Taejin; Sung, Hyokyung; Kim, Sangshik

ArticleIssue Date2021CitationMETALS AND MATERIALS INTERNATIONAL, v.27, no.10, pp 3810 - 3822PublisherKOREAN INST METALS MATERIALS
SCIESCOPUSKCI
Effect of Pre-Straining on High Cycle Fatigue and Fatigue Crack Propagation Behaviors of Precipitation Hardened Steel

Kim, Sumin; Song, Taejin; Sung, Hyokyung; Kim, Sangshik

ArticleIssue Date2021CitationMETALS AND MATERIALS INTERNATIONAL, v.27, no.6, pp 1383 - 1391PublisherKOREAN INST METALS MATERIALS
SCISCIESCOPUSKCI
Effect of stabilization annealing on SCC susceptibility of beta-annealed Ti-6Al-4V alloy in 0.6 M NaCl solution

Jeong, Daeho; Park, Jiho; Ahn, Soojin; Sung, Hyokyung; Kwon, Yongnam; Kim, Sangshik

ArticleIssue Date2018CitationMETALS AND MATERIALS INTERNATIONAL, v.24, no.1, pp 101 - 111PublisherKOREAN INST METALS MATERIALS
SCISCIESCOPUSKCI
Effect of superplastic forming exposure on tensile and S-N fatigue behavior of Ti64 alloy

Jeong, Daeho; Hyun, Semi; Sung, Hyokyung; Kwon, Yongnam; Kim, Sangshik

ArticleIssue Date2016CitationMETALS AND MATERIALS INTERNATIONAL, v.22, no.4, pp 594 - 600PublisherKOREAN INST METALS MATERIALS
SCIESCOPUSKCI
Effects of Cell Network Structure on the Strength of Additively Manufactured Stainless Steels

Kim, Jung Gi; Seol, Jae Bok; Park, Jeong Min; Sung, Hyokyung; Park, Sun Hong; Kim, Hyoung Seop

ArticleIssue Date2021CitationMETALS AND MATERIALS INTERNATIONAL, v.27, no.8, pp 2614 - 2622PublisherKOREAN INST METALS MATERIALS
SCISCIESCOPUSKCI
Effects of Cooling Rate and Stabilization Annealing on Fatigue Behavior of beta-Processed Ti-6Al-4V Alloys

Seo, Wongyu; Jeong, Daeho; Lee, Dongjun; Sung, Hyokyung; Kwon, Yongnam; Kim, Sangshik

ArticleIssue Date2017CitationMETALS AND MATERIALS INTERNATIONAL, v.23, no.4, pp 648 - 659PublisherKOREAN INST METALS MATERIALS
SCIESCOPUSKCI
Effects of Exposure Temperature on Tensile and Charpy Impact Properties of the 7xxx Aluminum Alloy for Aerospace Applicationsopen access

An, Woojin; Kim, Dohee; Kim, Bong-Hwan; Kim, Shae Kwang; Kim, Sangshik; Sung, Hyokyung

ArticleIssue Date2019CitationKOREAN JOURNAL OF METALS AND MATERIALS, v.57, no.4, pp 214 - 226PublisherKOREAN INST METALS MATERIALS
1 2 3
CONTACT US

RSS_1.0 RSS_2.0 ATOM_1.0

Gyeongsang National University Central Library, 501, Jinju-daero, Jinju-si, Gyeongsangnam-do, 52828, Republic of Korea+82-55-772-0533

COPYRIGHT 2022 GYEONGSANG NATIONAL UNIVERSITY LIBRARY. ALL RIGHTS RESERVED.

Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.

BROWSE

한국어